Ceiling mount sensor

Product Overview:
     One sensor does it all! The product is a new energy-saving switch adopts the good sensitivity detector, integrated circuit and SMT. It gathers automatic, convenient safe, energy-saving and practical functions. Three detectors inside compose a wide range detection field, they utilize the infrared energy from human as control-signal source to start the load at once when human enter detection field. And they can identify day and night automatically. It is easy to install and used widely, possessing the power show and detection show functions.

Sensor Function:
         Identify day and night automatically. You can adjust ambient light according to your desire: when turn to SUN (max), it will work day and night. When turn to MOON (min), it will only work under less than 3LUX circumstance. As to Adjustment, please refer to test.
         Detection distance can be set according to installation position and detection field.
         The power show and detection show: they will flash once every 4 seconds after plugging the wire, and flash twice per second when receiving the signal. At the same time, it shows the detection of the sensor is in normal condition.
Time-delay added continually: when it receives a second induction signal after the first induction, you should input time once more on the rest of the first time-delay basic. (Set time)
         Time-delay adjustment: it can be set according to your desire. The minimum is 8+/-3 sec; the maximum is 7+/- 1min.
Locking function: during working, sensor will keep load working when power is shut off for 2 seconds and then on. And shut off the power for 4 seconds and then on, the sensor will resume automation.

Specifications

 Power Source:100~130V/AC;
   220~240V/AC; 90~250V/AC
 Power frequency: 50-60HZ
 Rated Load:
1200W(220~240V/AC)/800W(100~130V/AC)/3000W
(220~240V/AC)/1500W(100~130V/AC) 
 Time Delay: 5Sec. ~9Min.
 Lux: <3Lux~daylight

Sensor Highlights
 360°Coverage
 SMD Technology Sensor
 Self-contained Relay
 Adjustable Time Delay
 Multiple Sensor Capability
 CE, GS Approval

Sensor Function:
        Detection fields: The detection fields are made up of the up and down, the left and right service fields. (see Fig.1).It is affected by the sensitivity and the moving orientation.
         It can identify day and night: It has been set before production. But it can only work in the less than 10LUX ambient light.
         Power and detection indication: The indicator lamp can flash once every 4 seconds after switching on the power. It can flash twice every 1sec after it receives the signals. So it shows if the detection and power are normal.
         Time-delay added continually: When it receives a second induction signal after the first induction, you should input time once more on the rest of the first time-delay basic. (set time)
         Time-delay adjustment: It can be set according to the consumers' desire. The min-mum time is 8sec±sec. The maximum is 7min±min.
         The switch: LX21B the "AUTO" condition when you put it in. It is "OFF" condition when you pull it out; LX21C switch "AUTO" "OFF" "ON"  

Technical Data

Sensor Highlights
SMD Technology Sensor              
Adjustable Time Delay
Adjustable Lux
Multiple Sensor Capability
CE, GS Approval

LX118

Product Overview:
One sensor does it all. The product is a new energy-saving switch adopts the good sensitivity detector, integrated circuit and SMT. It gathers automatic, convenient, safe, energy-saving and practical functions. The wide detection fields are made up of the up and down, left and right service fields. It works by receiving human motion infrared rays. When human enters detection fields, it will start the load at once and identify automatically day and night. Its installation is very convenient and its usage is very wide. It has the power and the detection indication functions.